To replace the vacuum amplifier on Lifan Solano, it is necessary to remove the main brake cylinder with the bacht first. Then, do the following: We unplug the wheel of the vacuum hose of the left front wheel to the left front wheel of the vacuum tube and disconnect the hose from the back valve plug.
- Unwind the nut of the brake hose of the left front wheel that connects it to the interposer.
- Loosin the vacuum hose and disconnect the hose from the non-return valve.
- A splint of the amplifier's forks and pulling the finger off.
- Scrolls the four nuts of the brake pedal arm.
- Take off the adsorber and the adsorber adsorber.
- Moving the vacuum amp forward to get him out of the creaking studs.
Before installing the new amplifier, if necessary, I will install an amplifier and a non-return valve. After installation, the brake system shall be pumpsidown.