If the engine speeds up and the engine speed is started, the throttle shall most likely need to be cleaned. This can be done by a special tool for stripping a crusher or a carburetor cleaner.
The tool will require a 5 mm hexagon and a flat-blade screwdriver. Paper towels and cleaning materials.
- It is desirable to warm the engine before the engine starts.
- If the layer is mechanical, it may not be removed if the electronic one is removed.
- The screwdriver needs to loosens the handle and remove the air duct.
- Six-hedron needs four bolts, which are on the perimeter and are clearly visible.
- Now you can unlink the intake manifold and pour it with the cleaning device, wait a little and gently wipe all the paper towels.
- The electronic box automatically adapts to about half an hour's drive, the mechanical does not need to be adapted.