To replace the ninth generation of lancer oil, you will have to perform a few simple steps. In the first place, you need to warm the engine up to the operating temperature-80-90 degrees. Then we need to unroll the cover of the oil filler under the hood. You have to tread carefully, because the oil is very hot. Next, you need to lift the car onto the lift and untwist the oil filter underneath the oil filter. Next, you can fill the oil filter with the oil filter and fill the oil filter with oil. To do this, you need to start an engine and see if oil is leaking oil in the oil filter.
- In the first place, the engine must be warmed up to the working temperature-80 to 90 degrees.
- Then you need to unroll the cover of the oil filler under the hood. We have to tread carefully, because the oil is very hot.
- Next, you need to lift the car onto the lift and untwist the bottom cover to drain the oil and remove the oil filter.
- Then we need to pour oil into the new oil filter and lubricate oil filter.
- Now you can install the oil filter, close the cork, and fill in the necessary amount of fresh oil.
- The final stage is a leak check. To do this, you need to start an engine and see if oil is leaking oil in the oil filter.
For the 1.3 and 1.6 engines, 3.3 litres of oil (including the fuel filter) is required, and for a 2-litre engine, 4.3 litres.