Replacement of oil filter with Mazda 3 (I) 2.3 filter from 2.0

1. First, you need to rotate the hex bolt screw that covers the ingots.
2. After that, you need to unroll the temperature sensor and move it to the side for comfort.
3. After that, you need to rotate the bolts between the bolts, fasten the mounting bracket to the engine block, and unscrew the bracket.
4. Then you need to clear the landing surface and install the gasket for the new oil filter adapter.
5. Before you can install the adapter, you must have a previously removed oil temperature sensor.
6. Then you need to install the adapter with a gasket, and place the temperature sensor on the installed adapter and set the oil filter to the adapter.
7. All work will take half an hour to an hour.

Add comment