Thermostat is a very important part of the car cooling system. If the thermostat is lost, the car will be overheated by summer or too long warmed in the winter. If you have ordered that the VAZ Thermostat (can be tested in several ways), it must be replaced.
The procedure for replacing the thermostat in the engines of VAZ (2105, 2106, 2107, 2108, 2109, 21099, 2110, 2111, 2112, 2113, 2114, 2115, etc.) is quite simple, so it is easy to carry out with your hands, without the assistance of the AutoService masters.
Note that the replacement of the thermostat on the VAZ only is carried out on the fully-powered engine. It is recommended to remove the battery from the car to facilitate access to the thermostat. The only tool you need to replace the VAZ thermostat is a screwdriver.
The following may be replaced by the following:
1. Remove the cork from the cooling system.
2. With the help of a screwdriver twist the hos that attach the patrons to the thermostat and detach the patchwork.
3. Remove the old thermostat and install a new thermostat.
4. When installing the tubes, they are recommended to lubricate the sealant on a silicon basis-so you protect the cooling system from possible anti-freeze leaks.
5. When all the patrons are seated and all the hamps are securely tight, light the coolant back.
After replacing the thermostat, it is recommended to remove the air from the cooling system to avoid the formation of the samples.
