Technical fluids

Details

Written by: Jason Hance

Also available:

Created: 24 December 2022

The manufacturer recommends that the DOT 3 brake fluid be used, but it is not easy to find it in the market. Moreover, all vehicles with the ABS are using the DOT 4 fluid. The properties of the DOT 4 are better than the DOT 3

Details

Written by: Jason Hance

Also available:

Created: 23 December 2022

R18A motor filling capacity on Honda Civil 8 (including a 0.4 l expansion tank).INC heated: After replacing coolant, 5.2 litres; After bulkhead, 6.5 litre. INC without heating: After replacement of coolant-4.6 l

Details

Written by: Jason Hance

Also available:

Created: 14 December 2022

In Santa Fe transmission, it is recommended to use the following lubricants: 1) Hyundai Genuine Parts MTF, viscosity 75W/85 quality class by API-GL-4, DAIMOND ATF SP-III, SK ATF SP-III, or other stamps approved by the manufacturer

Details

Written by: Jason Hance

Also available:

Created: 06 December 2022

According to Manualu, in the first place, Opel Astra H should be filled with Dexos 2 oil and, in the case of absence, other oils, which must have the following tolerances: GM-LL-025 (petrol) and GM-LL-B-025 (diesel)

Details

Written by: Jason Hance

Also available:

Created: 04 December 2022

Santa Fe Filling Volume (with petrol 2.7 litre engine and 2.2 litre diesel): (1) Motor oil:-For petrol engine-4.5 litres.-For diesel engine: 5.9 litres per litre:-1.9 litre for petrol engine

Details

Written by: Jason Hance

Also available:

Created: 25 November 2022

Hyundai Solaris is pouring brake fluid Brake Fluid DOT 4

Details

Written by: Jason Hance

Also available:

Created: 17 November 2022

The Opel Vectra producer recommends the use of such oils and liquids:-Motor oil for gasoline motors SAE 15W-40, 20W-50 quality class via API SG/CD or CH/CD.-Motor oil for SAE 5W-40, 15W-50

Details

Written by: Jason Hance

Also available:

Created: 16 November 2022

The Jaguar X-Type must contain fluid with the following characteristics: Specification: M2C192A Viscosity: SAE 75W140 The manufacturer states that the liquid is not necessary, it is filled for the entire life of the car

Details

Written by: Jason Hance

Also available:

Created: 30 October 2022

In order to replace the transmissive oil in the manual valve box, the following procedure is required: (1) Install the car in the hole or lift .2)

Details

Written by: Jason Hance

Also available:

Created: 12 October 2022

-Z16XE engine-3.5 l, for the Z18XE engine-4.25 l, for the Z-20ET engine, for the engine Z22SE-4.75 l, for the engine Z32SE, 4.75 l, for the engines Z19DT and Z19DTH-4.3 l, for the engines Y20DTH and Y22DTR-5.5 l, for the engine Y30DT-7.25 l