The insertion of a neutral gear box at the Gip Grand Cheroki-WK2 box is required when the vehicle is towed. The procedure is as follows: We stop the car and turn off the ignition. Turn the key to the ON position, but do not start the engine. We press and hold the brake pedal.
- Stop the car and turn off the ignition.
- Turn the key to the ON position, but do not start the engine.
- Press and hold the brake pedal.
- We put the ADT selector on the neutral position.
- Using a suitable thin item (such as pens or matches), press the switch of the neutral mode of the disdade box and hold it for about 4 seconds until the LED near the switch starts blinking.
- After the installation of the distribution box is complete, the neutral position of the LED shall be permanently lit and the display shows "Four Wheel Drive System in Neutral".
- Start the engine and put the ACPR in the reverse position.
- Send the brake pedal for a few seconds to ensure that the car remains stationary.
