Select your language

Vehicles with small turbo motors are slowly warmed up. For Yeti to warm up faster, you need to start the engine, turn on the passing beam and all the heating, but turn off the heater completely.

After the snow is cleared, it is possible to start the movement and after a couple of minutes turn the heating on 21 to 23 degrees and the air recirculation. If the glazing is sweating, recycling can be turned off.

In some Pictures, Yeti is equipped with a heater installed after the internal heat sink. You can check if the heater is installed by wire that is stretched from the driver's side to the side of the stove.

It is also possible to determine the presence of the heater by the characteristic click of the relay. If the heater is installed, the heat will be in the cabin in three or five minutes.

Add comment