The work must be done on a level platform, without a gradient. First, you need to disable the car battery cell and lift the car. Start the process of pumping the brake system from the air valve, which is furthest from the main brake cylinder. The pump must be placed in the air valve, the other end of the hose must be placed in the brake fluid. In this case, the brake fluid must remain the brake fluid. If the bubbles are gone, the assistant has to press the pedal to the point where the valve should be closed. This process should be repeated with all valves. Once the work is done, the brake fluid must be dosed to the maximum level.
- First, you need to turn off the battery pack and lift the car.
- The braking system shall be started through a valve that is furthest from the main brake cylinder.
- The injection hose needs to be inserted into the air valve, the other end of the hose must be placed in the brake fluid capacity.
- The valve has to be opened on half the back.
- At this time, the assistant should slowly pump the brake pedal until the bottle conjects the liquid with bubbles. In this case the brake fluid must remain in the compensation.
- If the bubbles are gone, the assistant must press the pedal to the point where the valve is to be closed.
- This process should be repeated with all valves.
- After completing the work, you need to finish the brake fluid in the tank to its maximum level.
