- It is necessary to raise the lever arm by 3 clicks before starting the adjustment.
- Then we need to reduce and remove one of the rear wheels.
- Next, you have to rotate the brake disc until the big hole in it is compatible with the adjustment star that is placed on the brake pad at the bottom (the hole is visible through the opening).
- The screwdriver must be rotated with an asterisk until the pads are convertiled so that the disc is pulled with an effort, but the power of one hand will be enough to pull it off.
- Now we need to set the wheel, drop the handbrake and check how freely it rotates. At the shock, the wheel shall have at least half-speed.
- Such an operation must be repeated on the other side of the car.
Also, there is a setting near the parking brake, under the console, but it is better not to overtake it, as it could lead to wedge wedges. It is recommended that you use the salon setting to reduce the release of the lever by 1-2 clicks, no more. It is also not advisable to pull the handbrake from the passenger compartment more than twice in a row.
