Car body

The information plates of the Mercedes-Benz C-class (W204) are located in the following locations: The plate with the VIN-number, the manufacturer, the mass characteristics of the car and the paint coating code is located on the front door of the right front door

Many owners of Goetz have to clean the glass badly. If the wiper blade is not replaced, the leash must be replaced. The key is removed by a key by 12

Even with minor damage (other than the loss), the Goetz bumper is better replaced because it loses structural integrity and becomes more fragile. It's quite difficult to repair the bumper so that the repairs are not visible

Take off the front bumper to the Mercedes Benz Class (W204) in this sequence: Rotate the wheels to the left and remove the clips from the front of the right front cover.

The Goetz engine's engine is rusting very fast, it's a car feature. The number can be completely unreadable in a year. You can use a thermostable varnish to protect the room. It is also suitable for a graphite lubrication which, when heated, forms a protective layer

Most of the Goetz had a distastrivated squeaking of the windshield. It's possible to get rid of this creak on its own. To do this, we need to carefully wash the car first

To replace the salon mirror Mercedes-Benz C-class (W204) in a mirror with a dimmed mirror, you need to make the necessary mirror-details A 20481034179051.Connect and remove the lid of the rain sensor

The screeching of the door is a common problem for Goetz, even for relatively new. The problem is solved with simple lubricant. It's got to be both hinges and door-limiters. The vasley is better to lubricate the thick grease, and the limiters are lubricated

Hyundai ix35's official dealers claim that there is no possibility of a car reeling in a service center. Amateurs have two options: either convert to a normal body shop or perform an installation on their own

If the glass washer on the Mercedes-Benz C-class (W204) is working late (the caretaker is already moving and there is not a liquid supply yet), the non-return valve on the nozzle is most likely. It may be clogged by a non-quality cleaning fluid