- Details
-
September 30, 2022
-
Written by Jason Hance
Mitsubishi ASX is equipped with doorknobs "under natural enough", so the handles (holes in the doors) may be scratched from the contact with the fingers and feet
- Details
-
September 29, 2022
-
Written by Jason Hance
The ninth generation of the ninth generation of lancer is pretty easy. The first thing to do is disconnect the power outlet from the rear fog lamp. After that, you need to rotate two screws that secure the top and bottom of the splash pins. The bolts are in the archway
- Details
-
September 27, 2022
-
Written by Jason Hance
The front bumper is easy to remove, but it will take time. The tools will only need a flat-blade screwdriver and a key to 10. First of all, we need to clean the place of the rivets on the bumper of the bumper in the wheel archway.
- Details
-
September 25, 2022
-
Written by Jason Hance
The rear bumper is much easier to remove than the front bumper. The first step is to unzip the two pistons at the bottom and unplug the highlight connector. Then spin one of the bolts out of the back lights, they're under the hood of the trunk.
- Details
-
September 24, 2022
-
Written by Jason Hance
It is recommended that the wiper blade scrubber be used. And on the sedan, and on the station wagon, the length of the yard-man on the driver's side is 600 mm, the passenger side is 450 mm. Method of attachment-hook
- Details
-
September 22, 2022
-
Written by Jason Hance
The rattling noise is most often caused by a bad license plate. It is also worth checking that the boot bracket is firmly secured with two bolts. The bubbling or bubbling sound may be caused by firing of valves which prevent the stutations
- Details
-
September 20, 2022
-
Written by Jason Hance
Lancer's body is perfectly corrosion-resistant. Even the earliest instances still don't have traces of rust. However, there are places where the paint is erased. Generally, this is the intersection of the rubber elements and the body
- Details
-
September 19, 2022
-
Written by Jason Hance
If the lid of the boot started to shut down badly, you'd have to adjust the boot lock. To do this, you need to open the trunk and find two blank trays in the castle area
- Details
-
September 17, 2022
-
Written by Jason Hance
If the boot lid is dorzing or closed with too much effort, adjusts the lock. It is primarily necessary to weaken the bolts located on the sides of the boot hinge so that the loop can move, but with a tangible effort
- Details
-
September 15, 2022
-
Written by Jason Hance
On the ninth Lancery, the door limiters are quite quickly out of order because of the design: the inside of the delimiter is a plastic [ [ plastic]] [ [ fence]] that is inoperable in a short period of time