Car body

Details

Written by: Jason Hance

Also available:

Created: 11 August 2022

Steak stops in a few seconds after pressing the window-lift button. If the battery's glamour button was hit shortly before, the settings and lifts should be "trained" again

Details

Written by: Jason Hance

Also available:

Created: 10 August 2022

There is no frame in the Outlander XL structure, so with slight skew when the machine is partly on the pavement, partly on the road, the body is playing a little. It is for this reason that in such cases the boot is not closed for the first time

Details

Written by: Jason Hance

Also available:

Created: 08 August 2022

The Mitsubishi Outlander XL has an acceleration due to the speed of the wiper, depending on the speed of the car in automatic mode. As the speed of the car increases, the gap between the brim is reduced

Details

Written by: Jason Hance

Also available:

Created: 06 August 2022

The rear door is removed very easily from the rear door. If you don't use a knife or a screwdriver, there's no trace of it. The icon is kept on the tape, not very well (it is sufficient to be worn, letters are easily removed)

Details

Written by: Jason Hance

Also available:

Created: 05 August 2022

The Mitsubishi Outlander Outlander XL is missing an indication of low level of omits liquid for glass. As soon as the washer doesn't work, it means it's time to leak the fluid.

Details

Written by: Jason Hance

Also available:

Created: 03 August 2022

If the fifth door starts to give out rolling noises, first of all it is necessary to pay attention to the attachment of the rear registration plate. Perhaps its frame is poorly fixed and it is the source of sound. The framework needs to be further strengthened

Details

Written by: Jason Hance

Also available:

Created: 01 August 2022

With Mitsubishi Outlander XL, there is an overnight without hatch. If he took it out, it would find a kind of hiding place. This is also obtained by removing the box above the right rear wheel in the boot

Details

Written by: Jason Hance

Also available:

Created: 31 July 2022

The glass pane can crack because of the temperature difference. There is a warning in the instruction that the heating in this model is powerful, the glass is heated very quickly. Therefore, before activating the heating function, it is recommended that

Details

Written by: Jason Hance

Also available:

Created: 29 July 2022

With careful consideration, you can find that the edge of the bonnet at Mitsubisi Outlander XL is lower than the edge of the wings. Therefore, when the hood is closed (if abruptly), cracks may be formed on the pharahs

Details

Written by: Jason Hance

Also available:

Created: 27 July 2022

The bonnet can be opened with a solid metal wire in the slot between the bonnet and the top grill. You can also put it through holes in the top grill of the heat sink