Car body

The front and rear parking sensors in Nissan Qahsqai II, officially sold in Russia, are available only in the LE + and LE Sport. There is no parking sensors available, despite Nissan official dealers

A common problem for Nissan the first generation of the first generation is the broken tip of the rear windshield wiper. The original leash is expensive. You can save money by buying leash from Chery Tiggo. He's almost no different.

To disable the headlights on Nissan Qashqai, you need to do the following: Open the top right corner to find a box with a relay (black box) Extract Head Lamp Wash.

The first generation of Nissan wheel arches is for extra cooling. There's a lot of dirt in the submachy space through them. To solve the problem, it will take a piece of not very dense linoleum of 8 to 22 cm

Nissan Kashkai of the second generation can be fitted with the following wiper blade: Bosch Aerowin, Sticky Flex FX650, FX430, FX450Denso Wiper Hybrid Hybrid 650 mm, Denso Wiper Blade Hybrid 430 mm. Denso Conventional OE 650 mm, Denso Wiper Blade Hybrid 430 mm. It is also possible to replace only rubber bands

Number for order of the original wiper blade for the Nissan Kashkaia First Wheel (600 mm), order number 28890JD900passenger wiper blade (380 mm)

The system for cleaning the rear-view camera on Nissan Kashkai of the second generation is installed only with the Safety Shield security package. This security package is available only for the two older Nissan Casca-LE + and LE Sport

The original nobility of Nissan Teana change only in assembly and is expensive enough. You can use the following recommendation to save. Nissan Tana is a perfect match for a Honda CR-V windshield wiper

Nissan Tana has 5 information cursors: 1) Vehicle identification plate. It is under the front passenger seat and is closed by a special lustre. 2) Body plate number plate (VIN-code)

In the event of a Nissan Teana waiver, it is generally necessary to replace the control unit with the beaner switches. But it is possible to try to restore the work of the caretappers on their own. To do this: Scrolling 2 carts at the wheel and remove the control unit