Car body

For Nissan Almera Classic, not many body colors are offered. In the color range there is only one bright color-bright blue

To dismantle the door to Nissan Almera Classic, it is necessary to twist the carrot in the bottom of the door and unbuckle the clippers from the top of the internal end. The next step is to pull up the upper arm of the arm up

When replacing the wiper blade with Nissan Almer, the Classic should be oriented first to their size. The length of the Nissan Almera Classic, the Nissan Almera Classic, is 550 mm and the passenger's length is 410 \   mm

Nissan Almera Classic is quite dark, not always helps even air conditioning. The problem is the underworked ventilation system. The compartment ventilation system is located behind the bumper, in the rear wing, but it is not connected to the passenger compartment

The doors of Nissan Almera Classic are painted without the use of primers and the paint is done on plastic. It happens that the paint starts to go to pieces even in new cars. The case is generally accepted as a guarantee

The front bumper of Nissan Almera Classic should be removed as follows: 1. Delete the three pistons located in the front of the loker on each side. 2/ Roll two screws on each side of the bumper. They're in his lower part.

To further protect the radiator from damage between it and the Nissan Almera Classic, a grid is installed

The volume of Nissan Almera Classic is very simple. To do this, it is necessary to turn over the spare wheel located under the floor of the boot and fastening it

The mirror folding is an option for Nissan Almera Classic, which is sold in Korea-Samsung SM3. If there is an electric actuator, you can install it. However, it should be remembered that the details of the electric drives of the folding mirror are generally expensive

It is not difficult to remove the rear-view side mirror on Nissan Qashqai, but it is necessary to carefully handle the mirror element itself