Car body

In order to replace the bonnet with the bonnet, the Honda Civil 8 is required to: Unmount the front grille, front inner subboard, and bezel on the driver's side

To replace the rear registration plate on Honda Civil 8: Detach six clamps on its perimeter. Then, clean the edge of the plate frame from both sides of the rear of the registration plate. Attention: don't scratch the boot lock.

The removal of the rear bumper of Liafane Solano is performed in this order: Detaching the minutes from ACB. Remove the rear wheel pins.

In order to replace the back door lock on the Honda Civil 8, it is necessary to completely lift the door glass.

Since the amount of liquid liquid consumed by the Honda CR-V III is greater than the effects of its work, many owners of the model disuse the headlamp (s) for the purpose of saving

If you cut the tank top on Lifan Solano, you can fix it. To do this: Remove the front bumper. disconnect the connector from the washer pump. Disconnect the washer pump from the pump and pour the cleaning fluid into the prepared capacity

It is not recommended to regulate them with pins or other similar sharp objects in connection with the Honda CR-V III, which is equipped with a Honda CR-V III. This way, you can damage the housing.

The attachment of the hinge door of the back of the Honda CR-V III is placed under a plastic cover. It must be removed by a flat-blade screwdriver or other suitable instrument

Before you start, you need to disconnect the minus cell phone.

Catalogue numbers of the rubber band Honda CR-V III: 76632-SWA-J01-from the front passenger. Length-42.5 cm 76622-STK-A01-on the driver's side. Length: 65 cm. Some problems may arise with the search and order of the rear windshield wiper