Car body

The resonance layer of resonant cotton often occurs when the left or right side door of Honda Accord 8 is closed. The sound manifests itself in both new and old cars. At the same time, if the trunk is open, no cotton can be heard

To remove the rear bumpers, Lifan Smiley will need a flat and Phillips screwdriver. The dismantling process consists of the following: Unlocking the rear wheels of the rear wheels.

To remove the front bumper to the Honda Civil 8, it is necessary to remove the front-wing and front-grille trim. Then, unscrew the thumbscrews on the front bumper and detach the retainers by pulling the internal clamp over the edge of the retainer

To remove the front coverlet on the Honda Civil 8, you need to remove the front plastic covers. Then remove the front dirt shield located on the back of the wheel arches by unscrewing the three screws

The rear registration plate frame on Lifan Smiley is often crouched so that when the door closes, it hits the paint coating. Over time, this could result in scratches and corrosion

To tune the bonnet to the Honda Civil 8 Honda, front wing, the front grill, and cover should be removed. Then, looser all the bolts

To adjust the fuel filler of the fuel tank at Honda Civil: Donation of two bonnet mounting bolts. Then adjust the filler cap of the fuel tank until it is close to the bodywork, moving it up and down to align the gaps

The installation of the non-return valve on the rear window heater Lifan Smiley is made to rupture under the rear of the right rack. To do this: Take off 3 pistons and two screws and disconnect the frame

Removal and installation of the front fender for some Honda Civil models: Move the GRU DPMG to remove the clamp and disconnect the hook from the washer.

To remove the rear bumper to the Honda Civil 8, you need to remove both the mud-pads to roll three screws on each side