- Details
-
January 12, 2023
-
Written by Jason Hance
Water usually appears after washing or after heavy rain in the front passenger's legs
- Details
-
January 11, 2023
-
Written by Jason Hance
It's a pretty common problem for the Hover. The hatch is broken in winter, in a heavy frost, and there is a strong clap, and the glass is flopping into small pieces. This is a structural handicaps
- Details
-
January 10, 2023
-
Written by Jason Hance
The back door of the Hover can be closed with a pretty big effort from the factory. If the door is closed and the door is closed, you need to verify that the rubber tip of the trailer is not lost, which is responsible for turning on and turning off the alarm
- Details
-
January 10, 2023
-
Written by Jason Hance
It is possible to install a panoramic mirror on the Lexus RX 330 II without any additional work. To detach a mirrored element, you must install it in such a position that a clearance is displayed below
- Details
-
January 09, 2023
-
Written by Jason Hance
If you stop working the rear window washer in the Hover, the first thing you need to do is check that the valve is not blindly placed under the right front wing. This terminal is responsible for switching the valve
- Details
-
January 09, 2023
-
Written by Jason Hance
The factory backbrush size is 35 cm (38 inches in size), but may not rise because of a nonstandard anchorage.The front brush size on the passenger side is 53 cm (the longer brush is definitely not suitable-it will be a rack of windshield)
- Details
-
January 08, 2023
-
Written by Jason Hance
The main reason for the heavy pollution of the engine on Lifan Smiley is the small routine protection of the engine. The lack of an opening for the oil drain is also related to the deficiencies of the accessories. Therefore, it is desirable to change staff protection to another
- Details
-
January 08, 2023
-
Written by Jason Hance
If, during the rain, the water drip onto the driver's left shoulder or the right shoulder of the front passenger, it is likely that the window frame does not have the door openings in the doorway. It's pretty easy to solve a problem, but you have to make an effort.
- Details
-
January 07, 2023
-
Written by Jason Hance
You need a big screwdriver to adjust the castles in the Hover. The marker needs to be marked as before the adjustment. Then, you need to looser the screws so that the brackets can move, but do not hang around. Now we need to put the bracket in the new position and tighten it.
- Details
-
January 07, 2023
-
Written by Jason Hance
One of the most common causes of the failure of the door handle on Lifan Smiley is the blinding thrust between her and the castle. To correct the problem, you need to remove the door cladding. Remove polyethylene near the lock. Check the location of the details