Car body

In order to improve the spraying of the washer fluid on Lifan Smiley's windshield, you can replace the normal trout

To install the front splash screens on the Honda Civil 8, make holes in the clip-hole by a thin drill. Then you put a splash-button on the front porch and roll the seams. Before installing the rear sprays, it is necessary to unroll two full-time carroines at the bottom of the cover

To replace the courtshell by Honda Civil 8: Dismount the right shield of the engine compartment. Disconnect the "2P" engine of the engine of the windscreen and the engine of the headlight washer.

The paint coating of the body of Lifan Solano is fairly thin, so it is very fast. However, the metal is resistant to corrosion, but if the damage is not repaired, in a year or two there will be rust

To replace the insulator and sealant on the Honda Sivik 8: Open the hood and lift the seven retainer retainer tabs and seven lock anchors.

In order to replace the frame and the roof of the roof of the roof of the Honda Civil 8, it is necessary to disassemble the roof and roof of the roof hatch. Disconnect the drive connector, put on the protective gloves. Detach four discharge tubes at the corners of the roof hatch

To remove the motor spout on Lifan Solano, you must have a 13-and-a-blade wrench. The order of operation is as follows: Removes the protection of the engine by loosening the bolts of the rear anchorage bracket and completely loosing the front anchorage bolts

To replace the glass cleaner of the windscreen on the Honda Civil 8: Raise the windscreen wiper, first on the driver's side and then on the passenger side.

To replace the roof of the roof of the roof at Honda Civil 8, it is necessary to completely close the glass and move the sun visor to the end.

To remove the front bumper to Liafane Solano do the following: Remove the grill grill (3) and turn two screws with the rubber heads (2)