Most cars have a cable lock with a cable lock. The last one is attached to the lock and the other to the button or the ginger in the car. If the cable is torn or disconnected from one of the anchorages, the bonnet is no longer open. But there are ways to open a bonnet in this situation.
The choice of the method of opening the bonnet depends on the location of the cable-rope:
1. The bonnet has broken about the bonnet lever in the passenger compartment.
This is the simplest situation. We need to find an end to the broken rope, take it with pliers and pull it on itself, towards the salon. The bonnet has to open. But the rope still has to be replaced.
2. The dew was cut off from the bonnet.
The solution to this problem will require more effort. The way in which the problem is resolved depends on the direction of the bonnet.
2.1. The bonnet is opening up.
The first thing to do is to carefully lift the grill of the radiator (it is done differently in different cars) and find the bonnet lock. After that, the metal rod needs to be pressed against the executive mechanism of the lock so that it is snapped.
2.2. The hood opens back.
This is the most difficult case. If the bonnet is closer to the windshield, there are air vents, you can try to catch a ragged cable by drying the wire in the air vent. If you do not do this, you must remove the grille and spin the bonnet fastening.
The cable is usually over-tiled and torn due to the absence of lubricant, so it should be monitored.