The replacement of the engine oil and the filter on the Volkswagen Tuareg 2 shall be carried out as follows:
1) If the oil filter is located above, remove it first.
(2) Unlock the cork and drain the oil to the appropriate capacity.
(3) As the cork is collected with a seal, a new cork shall be applied to the drain after the discharge of the oil. 30 Nm lock (for M14) and 50 Nm (for M24).
4) To drain the oil from the filter (for the lower filter models) by unscrewing the cork at the bottom of the filter body.
(5) Remove the cover and remove the filter element.
(6) Install a new filter element, replace the sealing ring, and tighten the filter cover.
7) Fill the new oil with the engine.
