To reduce the pressure in the Honda Axle 7 fuel system without using the scanner, you need to:
(1) Turn the ignition switch to the OFF position.
2) drag the main relic of the fuel system (lower right side of the mounting block in the salon).
3) Start the engine and wait until it stalls.
(4) Turn off the ignition.
(5) Roll up and twist the filler cap.
6) Disconnect "minus one" from the battery.
(7) Remove the quick-disconnect coupling of the fuel tube on the engine and press the retainer off the receiver.
(8) After the repair is carried out, install everything in place.