The seat belt drive of the hydraulic amplifier on Santa Fe (2.0 and 2.4) shall be adjusted as follows:
(1) The rope-belt shall be checked for accuracy in the pulley groves.
(2) A force of 100 N (10 kg) shall be applied to the back of the belt between two pullees.
3) Measure the bending value. It shall be within 6.9mm.
4) If the propetation is greater, do the following:
-Loosin ' the lock-bolts screw of the tenor.
-Adjust the belt tension with the adjusting bolt.
-Lock the retaining bolt.
-Checking for tension.
-If the tension is not sufficient, then repeat the procedure, having previously checked the bulb on one revolution.
