For the replacement of the front fist in a Citroen C4 car: To remove the wheel and to block the wheel and to remove the wheel and to prevent its rotation, remove the wheel and turn off the nut. Caution: It is not recommended that you remove the nut from the counter with the help of a counter-convoy to remove the risk of attaching the brake disc to the hub. Then remove the wheel sensor carefully by unlocking the mounting bolt. Remove the brake disc bolt. Remove the brake disc. by bolting the lever arm from the swivel pin from the rotary fists (0709). Release the arm's arm from the swivel pin (0622). Replace the hinged fist (0622) with the new bolts.Collect everything in reverse sequence.
- Install the car on the lift.
- Then turn away the wheel bolts.
- Lift and block the car by outweighing the front wheels.
- Remove the wheel and, by means of a fixture, in the stationary position of the step (0606AY), lock the hub to prevent its rotation.
- Remove the hull and turn the back of the ShRUs. Caution: It is not recommended to keep the RIL Gull with the help of a counter-convoy to turn it away-the risk of derailing the mounting of the brake disc to the hub.
- Then gently remove the wheel sensor with the bolt.
- Scroll and hang the two mounting bolts.
- Remove the brake disc by bolting the bolt.
- Pull the suspension lever arm from the swivel-pin (0709) from the swivel pin to remove the hinge pin arm.
- Release the suspension lever from the swivel pin (0622).
- Replace the self-contained "nylstop" nuts with new nuts.
- Replace the two rack-mounting bolts with the new bolts (pregreased with gum adhesive).
- Collect everything in reverse sequence.
Moments of delay:
- Steering hinge-50 Nm
- Attaching the carrier to the 90 Nm
- Attaching the wheel sensor-90 Nm
- Attachment Guyk-325 Nm
- Attaching the Bracket to the 105 Nm
- Attaching the fist to the suspension lever 50 Nm
- Disk Drives-10 Nm
