Dismantling of the steering gear racks in Chery Tiggo
Dismantling of the steering gear racks in Chery Tiggo
Details
Modified Date:
Created Date:
It is necessary to drain the entire liquid from the steering system before starting the removal of the Tiggo gear rack.
You will then need to install the car on the "hole" or lift it on the lift.
Then it will be necessary to disconnect from the water-amplifier's tank from the back line and put it in the receptacle where the fluid of the hydro-amplifier has been merged.
Then start the engine and, without touching the pedal, rotate the steering wheel left and right.
The engine must be taken off, otherwise the pump can be affected.
Once the liquid ceases to flow, the engine must be shut down. The car must be on the "pit" or the lift.
The upper and lower skin of the gear rack must be removed.
Remove connections between low and high pressure hoses.
Remove the left and right rack bolts of the steering gear, as well as roll the bolt, which connects the left and right transverse thrust and the pivoting fist.