The adjustment shall be as follows:

(1) position lever in position N,

(2) The fastening of the cable of the cable to the arm of the manual control (under the bonnet).

(3) Hand control lever in position N,

(4) The selector bolts of the selector switch.

5) Rotate the selector casing to align the hole in the flange of its frame with the opening at the end of the manual control lever.

(6) Without changing the position of the box selector switch, tightening the bolts of the fastening torque 10-12 Nm.

(7) A slight tightening of the cable and a tightening of the adjustment nut.

(8) Verify the clarity of the activation of ACPT regimes.

Add comment

Security code