- Details
-
March 11, 2023
-
Written by Jason Hance
Nexia is well suited for an overnight stay from Opel Astra, his number for the order-17 40 120120N Neksik of the Korean assembly on the plating has filler holes, under which there are holes for the fitting of the baker. It's going to take a little bit of drilling down these holes for the night of the night.
- Details
-
March 10, 2023
-
Written by Jason Hance
In the VAZ 2110, seat warmers and backrest circuits are simultaneously operating. If the seats are pluffed, additional time may be needed to heat the heat and pass through them
- Details
-
March 10, 2023
-
Written by Jason Hance
The headscarf on the Necsiah light is weak, so many of the lights are installing additional headlights into the central racks. The appropriate background code is 96247398. A wire and a thermo-shrink tube will also be required
- Details
-
March 09, 2023
-
Written by Jason Hance
The Necsiah factory doesn't set pompas on the bridesmace switches, so they don't look very neat. The Dusters can be set on their own. The dugout from Opel Astra, their order number is 1241358. We need to order two duster.
- Details
-
March 09, 2023
-
Written by Jason Hance
In order to fold back the front seat of the VAZ-2110/11/12, it is necessary to perform several actions. Above all, move the seat to the rearmost position, after which, using the handle of the regulator, set the back upright
- Details
-
March 08, 2023
-
Written by Jason Hance
As a rule, the Necsiah works out without a [ [ salon]] filter, but it has a staff position
- Details
-
March 08, 2023
-
Written by Jason Hance
It is not uncommon for non-Neccating seats to be creaked when unevenness is passing. The reason for that is the ball that flew out of the seat sled. This seat is starting to play. The ball diameter is 7 mm. The ball can be installed without dismantling the seat
- Details
-
March 08, 2023
-
Written by Jason Hance
To be able to access the VAZ-2110 salon filter, you need to unmount the chevrons and windscreen wipers with a 13 key. Then, remove the front plastic grate with the screwdriver
- Details
-
March 07, 2023
-
Written by Jason Hance
The main source of the creak and drownage-buttons and adjustments on the instrument panel. The first thing to do is to remove the panel. The cause of the tree is the gap between the board and the body of the button or controller
- Details
-
March 06, 2023
-
Written by Jason Hance
Neksiah, which is not equipped with air-conditioner, has three process openings on the engine side. One is for the drain of the air conditioner. The holes are closed with a piece of noise-proofing material. Through these holes, the water enters the salon