Vehicle interior

The light mode of the board computer Ford Focus 2 raises questions from many owners of the car. The fact is that the illumination of the Ford Focus II computer continues to burn after the ignition is switched off

If the engine running in the VAZ-2110 does not extinguash the battery charge, this indicates that there is a gap or a weak tensioning of the generator's belt or the failure of the propellant. The generator itself may also be undisciplined

The lighting of the Focus 2 instruments shall be carried out by means of LEDs, which are included in the board of the instrument panel. To change the colour of the illumination, it is necessary to remove the devices, remove the diodes and get the other necessary colors

It is possible to change the range only on the most expensive model of the magnets from all that were placed on the first generation-Blaupunkt MP3. To do this, you must do the following: At the same time, you can press and hold the AM/FM and MENU buttons for three seconds

In the VAZ-2108/09/99 salon, front seats may be installed from the VAZ-2110. The seat should be moved as a whole, together with the brackets that provide for the mobility of the seats in the longitudinal direction and the secure attachment to the body, the so-called "sled"

The kick-start key can break. If the key is bad enough, just lubricate its hinge. If the lubricant did not help, we can try to separate the two halves of the shell. However, it is important to remember that they are gluted and unlatable

For some operations (for example, to improve the soundproofing of the salon or to correct "cricket"), Ford Focus 3 has to disassemble the front positions and remove the sheathing. However, many difficulties arise with the independent dismantling of the frame on the Ford Focus III

The owners of the VAZ-2108/09/99 with the so-called "high panel" (production of the late 1990s and the beginning of the 2000-s) complain about the creaks that occur in different places in the dashboard

The light in the saloon of the Ford Focus 2 is removed very easily. It must be removed from the windshield and removed by a pair of centimeters. After that, on the back side of the plane, it can be removed from the frame and removed

There is a function of automatic door locking on many cars after the beginning of the movement. In the 3rd generation Ford Focus, this option is also available, but it is off-line for security reasons