Vehicle interior

Many X-Type owners collider with a head-monitor failure. The cost of repairs will cost about 10-15,000 rubles, as much as it will cost. Model-Denso 1X43 10E889 DE, order number 10300108

The dynamic stabilization system reference lamp on the A6 generation 3 generation is activated in the following cases: Lamp is lit when ignition is turned on and the system is extinguished in 2 seconds to monitor system health

To reset the value of the onboard computer to the A6 A6 generation, you can select the option we want to reset (average fuel consumption, average speed or travel time) and hold the RESET button for approximately 2 seconds.

There are two ways to unlock the magnets. The easiest is to find a sticker with the unlocking code in your service book. If it is not saved, you can make a request for the code from the dealer at the VIN number

To remove the door lining of the A6 generation 3 generation, you need to do the following: Carefully lift and lift the lattice dynamics VCR. It attaches to the latches

If red warning lights are included in the combination of the A6 generation 3, you can press the CHECK key to find out the details and the solution of the problem: Motor abstellen und Kiihlmittel priifen-you need to stop the engine and check the coolant level

Many of the owners of the Jaguar X-Type collide with the problem of the bevels on the cover of the stylus box. If the plastic coincides with the coating, you can remove the cover completely

The timing of the next maintenance of BMW 1 appears on the panel display for a few seconds immediately after the start of the car

To set up the automatic folding of the display on BMW 1, you need to press the MENU key on the iDrive to go to the initial menu. You can press the puck and go to the i menu. Select Settings and click on the puck. Select Settings display and press the puck. Select Display and press the puck

To update the firmware of the head device Jeep Grand Cherokee WK2 do this: Determine the version of the head device (Russian versions of RG4-with navigation or RG3-without it). We find the system information in the settings and determine the firmware version