Vehicle interior

Details

Written by: Jason Hance

Also available:

Created: 01 March 2022

The back seat on the Opel Astra J is very easy to take off. In the back area, the seat shall be secured by a hook and in the front seat with a plastic latch. You need to unlatch the latch and lift the seat so that the hook is out of the cordon.

Details

Written by: Jason Hance

Also available:

Created: 27 February 2022

If you look at the inner space of the Opel Astra J GTC, on the side surfaces of the glove box, you can see the pats where nothing is fixed

Details

Written by: Jason Hance

Also available:

Created: 26 February 2022

You can only buy a staff arm with the central tunnel console. You can order the console in online stores (code 0196729 with fabric upholstery, 01966726-with leather upholstery)

Details

Written by: Jason Hance

Also available:

Created: 24 February 2022

First, you need to put your fingers on the outside plastic cover of the salon and pull it off by pulling it down. Next, you need to unroll the swarts (the star of the TORX 20) on which the headscarf is held. To remove a platon, you must disconnect the three connectors

Details

Written by: Jason Hance

Also available:

Created: 23 February 2022

To do this, remove the glove, so the salon filter on Astre is located behind it. After that, the filter must be unclapped from the two sides of the filter and the lid must be dropped, and the filter itself is the filter (down as a book)

Details

Written by: Jason Hance

Also available:

Created: 21 February 2022

In the control of dust and fungal, the evaporator of the air conditioner is supported by the foam scrubbers of the evaporator of the air-conditioner. In the first case you need to remove the salon filter

Details

Written by: Jason Hance

Also available:

Created: 20 February 2022

On the bottom cover of the column, a hole of about 20 mm in diameter should be found. In this hole is the self-mounting of the anchorage that needs to be turned off. Then pull the top of the steering column and click it

Details

Written by: Jason Hance

Also available:

Created: 18 February 2022

The first thing to do is to remove the plastic lining to the right of the glove compartment-a lock on the passenger's airbag lock.

Details

Written by: Jason Hance

Also available:

Created: 17 February 2022

Sometimes it is necessary to dismantle a small crate, for example, to replace fuses (the third circuit breaker is just behind it).It opens in a crate. The right side of the container is pressed to the left (compressed to the center of the box)

Details

Written by: Jason Hance

Also available:

Created: 16 February 2022

To do this, it is necessary to remove the attachment of the side filler in the front seat and remove the lining-it will prevent the removal of the plastic lining of the threshold