You can set thresholds (or protect thresholds) based on the design of the thresholds themselves. The thresholds are most often set by brackets, which are mounted at two points on the body and the frame of the motor vehicle (bottom):
- The rubber cushion of the support of the bodywork;
- In the hole in the body by means of a bolting bolt.
Two or four brackets may be used in the threshold. In the first case (this is the most reliable option), each arm has two support points (fixed with bolt bolt and bolts), and in the second, each arm has a single point of support. The thresholds with two brackets are also used, which are fixed only to the body.
Kronstein attached to the body with a bolted bolt
If the threshold for the place of manding is to be installed, then four openings may be used from the bottom and two at the side of wheel archers. The top of the building doesn't have a charmor, it's just pressing against the body.
