The car is used by an automatic tenor of the belt, which consists of a tension roller and a hydraulic shock absorber, which is to be replaced by the assembly. The order of substitution shall be as follows:
- Use the key to "19" to lift the tenor (rotate counterclockwise through the mounting bolt) and remove the belt drive belt;
- Using the head on "13" unscrew the lower bolt.
- Using the head on "24" unscrew the top bolt.
- Delete an automatic tenor;
- Installing the tener is done in reverse order.
If the tenor is temporarily removed (not for replacement), it must be kept in a vertical position, the shock absorber will be removed (this will prevent the oil leak). After installing the tener, it shall be tripled (as described in paragraph 1) to crush the air from the shock absorber.
