Peugeot 206's clearance operation includes the following:
-disable the battery
-removal of the crankcase exhaust hose. To do this, press the yellow striker and pull the hose.
-remove the cover of the air filter body
-disconnect the connector from the throttle. This requires the release of the retainer in the connector
-to unscrew the three screws that secure the intake manifold
-remove the air pressure sensor. To do this, the key is to twist one screw-up on an 8-screw anchorage
-to process the splits and sensor with a special tool, wait a few minutes
Before installing the throttle back, it is advisable to replace it with a pad. It's going backwards. After the assembly, it is necessary to adapt the flap. It takes 15 seconds to turn on the ignition. When the ignition is repeated, it is necessary to immediately release the accelerator pedal to the floor and release quickly. Next, you must turn off the ignition, wait 20 seconds.