To adjust the lancer throttle, only a key of 10 is required.
To verify that the throttle control is completely open, you need to remove the tube from the throttle. Then ask the assistant to press the gas to the point and see if the shale is completely open. When the throttle is released, the throttle control shall be completely closed. If this is not the case, the cable should be adjusted.
To do this, you need to loosen the two mounting bolts of the cable-management arm to the outlet tube and move the bracket to the right so that the throttle control is completely closed. If the splits are not opened completely, the bracket needs to be shifted to the left until it begins to open completely. After the adjustment is completed, the bolts of the arm need to be tightened and secured.