Leakage in the contour of the engine cooling system is a common problem faced by many owners of the Lada Kalina. This is most common for one of the following reasons:

The dense interconnection of motorways in the thermostat area, the expansion butterfly or the radiator of the OZ is resolved by a lift or a replacement of the homuters. It is necessary to search for sources of a leak in the engine, because otherwise the cooling liquid evaporates rapidly. If the inspection of the compounds, highways and radiator has not given anything, a sheet of cardboard can be placed under the engine compartment: it will be more visible on it.

The leak of the baking radiator or the unpacked connection of the pipe-radiator indicates a wet carpet in the legs of the driver and the passenger and the characteristic smell in the passenger compartment. If you have doubts, you can remove one of the ventilating deflection units in the legs and through the opening of the tube connection and the radiator itself. Attention: There are many known cases where the cooling liquid from the heater radiator has been poured into the ECU.

Faulting expansion-if the excess pressure relief valve "is stuck" in the open position, the antifreeze or the melancholy evaporates from the bam without leaving any trace.

The pump of the pump will be diagnosed on the traces of longingly on the plastic cover of the EMG. The pump is to be replaced.

The gasket of the HBCD is found under the WL at the junction of the head and the block. In addition, the liquid may be caught in the oil crater-this can be understood in the white emulsion on the oil-plunder, the smoke of a specific smell and oil spots in the expansive bacht. Often, it is recommended to tighten the bolts of the HBCD, but it usually lasts for a short time, so it is more reliable to replace the gasket.




Add comment

Security code
Refresh