The dismantling of the Lifan Smiley generator is as follows:
- We're filming the generator.
- Unwind the nut, remove the insulating tuller, and unwind the three fastenings of the generator cap.
- Tighter two screws and remove the toothbrush.
- Unwind the three screws and remove the voltage regulator.
- Holding four bolts and taking out the lock-up.
- Loosing the pulley generator of a pulley of the generator is nothing more than a half-turn, a pulley pulley shall be removed from the generator.
- Unwind four nuts and remove the back of the generator.
- We're taking off the generator rotor.
- We're going backwards.