- Details
-
October 26, 2022
-
Written by Jason Hance
It may be necessary to disable the normal immobilizer on Lifan Smiley if it does not have a key chain or if it does not work. The procedure consists of the following:
- Details
-
October 25, 2022
-
Written by Jason Hance
To set the thresholds for Lifan Smiley to be illuminated when the doors are opened, you need to pull two wires under each side of the door.
- Details
-
October 24, 2022
-
Written by Jason Hance
Lifan Smiley fuses and relays are located in the engine compartment, in the battery compartment and in the passenger compartment
- Details
-
October 22, 2022
-
Written by Jason Hance
Link the keyrings to the security system, Lifan Smiley, in this order: Take off guard vehicles, both keyrings. We put the key in the ignition. Let' s turn the ignition four times on and off
- Details
-
October 21, 2022
-
Written by Jason Hance
Many owners of Lifan Smiley face problems with bad military contacts. This is particularly the case with the contact of the "mass" of the engine
- Details
-
October 20, 2022
-
Written by Jason Hance
Lifan Smiley's electronic systems are one of the weakest points in the car
- Details
-
October 19, 2022
-
Written by Jason Hance
Lifan Smiley lamps have only two light bulbs that can be changed in the reversing lamp and the direction indicator. The other lamps are LED and are located in an unborn lantern
- Details
-
October 17, 2022
-
Written by Jason Hance
The procedure for replacing the front position lamp on Lifan Smiley is simple enough: Put clothes with long sleeves to avoid scratching the sharp parts under the hood.
- Details
-
October 16, 2022
-
Written by Jason Hance
Lifan Smiley's Salon lamp (S10W) is characterized by low light and relatively large energy consumption. Alternatively, you can install LED ribbon on your own. To do this, use the screwdriver to remove the background lens
- Details
-
October 15, 2022
-
Written by Jason Hance
Liffan Smiley's cornering lamps are often sweating in the damp weather. The reason for this is poor leakproofness of the plug-in. To fix the problem, do the following: Arrange the front of the lamp at the front, or a suitable plastic shoulder blade.