Electrical equipment

A common problem for Lifan Solano is the swipings of the blinkers. To fix it, you can do the following: Take off the decorative pad and unwind the two mounting screws on the climatic installation

There are several reasons for the failure of the stop-signal on Lifan Solano. If one lamp is not lit, it is likely either to be overblown or there are problems with the transaction. If all of the stop lamps are not lit, it is possible that the stop-alarm switch ("frog") may not be available.

On Lifan Solano, it is possible to connect the far headlights to daytime running lamps. Since the light is usually used less frequently, it will reduce the frequency of the lamp. The lamp's lamp will be about 40% and it will light smooth

Fuses and relays are located in the engine compartment of Lifan Solano for protection of such circuits: 1-rel relay of valves-2 relays.

The safety of the salon unit on Lifan Solano is located at the bottom of the finger box. They protect the following circuits: 1-power to the central lock of the HPC unit

To enter the key programming mode in the control unit of the HPC, Lifan Solano, do the following: Let' s check the work of the trailer's trailer. Closing the door.

The bulk of the problems with the Lifan Solano electro are linked to the operation of the HPC unit, which manages all the on-board electrical systems. Owing to its failure, the direction of the indicator lamps and the central lock may not be stable

For those who want to install daytime running lights on Lifan Solano without inverting the bumper, you can use the following scheme: Buy 5 bright LEDs, resistor 100 Om and relay from VAZ

Lamps of the following types shall be installed on Lifan Solano: Front-Headlamp H3, Power 55 Wt.Middle Lamp H1, 55 W

One of the problems of Lifan Solano is the freezing trailer doors. One way to solve this problem is to install a trailer spring. I'm gonna need a tool and a key for eight. It will also be necessary to find a spring with a diameter of about 8 to 10 \   mm