- Details
-
November 08, 2022
-
Written by Jason Hance
Most of the time, the door doesn't come up because the other doors are locked. Before lifting the luggage door, the rest must be unlocked. The glove switch of the rear door is located in the bar.
- Details
-
November 06, 2022
-
Written by Jason Hance
The height of the lift of the luggage door with an electric drive on RX II can be programmed. To do this, you need to do the following: Unlock all doors (no matter how you do it, you can also with a key chain, and from the salon)
- Details
-
November 05, 2022
-
Written by Jason Hance
After you disconnect the battery, adjust the opening of the glass and the hatch, as well as the customization of the adaptive headlamps. For everything to work, it's necessary to retrain everything.
- Details
-
November 04, 2022
-
Written by Jason Hance
There is a plastic cover that is placed on the three latches on the gapper drawer. To remove it, you have to put pressure on the petals of the latch. This covers the fuse box, and the service access cover indicates the safety of the unit that is responsible for the safety of the unit.
- Details
-
November 03, 2022
-
Written by Jason Hance
You need to be careful about setting up your service menu and change only those settings that you understand. Otherwise, it may end with a tour of service
- Details
-
November 01, 2022
-
Written by Jason Hance
The following actions must be carried out in order to enable the fog lamps to be separately from the passing and driving beam. Remove the Lexus door filler by pulling it up. Detach the highlight connector.. 3
- Details
-
October 31, 2022
-
Written by Jason Hance
In order to replace the driving lamps and the position lamps, it is not necessary to remove the headlamp to replace the xenon-new passing beam headlamp.
- Details
-
October 30, 2022
-
Written by Jason Hance
The conjecture of the second generation of headlamps on the second generation is not a leakproofness of the connector to which the cap of the lamp is inserted. You can solve the problem by using a leak to handle the slot itself
- Details
-
October 29, 2022
-
Written by Jason Hance
Lifan Smiley's boot light is quite dull and uneven. To correct the situation, you can do the following: Take off the regular platon
- Details
-
October 27, 2022
-
Written by Jason Hance
If the lever on the direction indicator lamps on Lifan Smiley is intermittent, two main ways of correcting the problem are possible. Rotation relay-for example, relay from VAZ 2108