Electrical equipment

H1-Range H4-Passing + Hon) The xenon installation options are: xenon to a plain xenon in H4 and only H1

The temperature indicator in the Hover cabin often shows an overcharged temperature (+ 20 to +80 degrees). At the same time, climate control is starting to work poorly: the air temperature will need to be set up from the defleclecturers.

In fact, the polarity of battery connection in the VAZ-2110 is not as scary as many think, it is possible to get rid of only a pair of burned fuses. Moreover, in many blocks there are diodes that protect the accumulator from shuffles

To get to the anti-manslaughter system, you need to remove the headlight. Let' s look at the example of the right anti-manic, the left mirror on the left. The first thing to do is to unscrew the bolt on 10 to the right side of the headlamp and 2 bolts on the 10 top of the headlamp.

To access and replace the lamps in the back lamp, it is necessary to open the luggage door, to unscrew the bolts of the lantern (they are not covered), to shift the lantern so that the pistons are withdrawn from the clutch (the upper lantern-on itself, the bottom side)

The marking of the controller installed on the VAZ-2108-2115 motor vehicles is located on the VU body. In order to mark the marking, the side frame of the torpedo must be removed

In the Hover buttons, there are no light bulbs installed. To replace the light bulb, you need to remove the button (for example, wrapped with a soft cloth screwdriver) and remove it from the socket. The side of the button needs to find all the round elements and turn them around a little, so that the lamp with the cartridge will be dropped.

The procedure for replacing the lamp in the front direction-indicator lamps Honda Chord 8 is: 1) Start the engine and turn the steering wheel to the right (if you need to change the left lamp) or to the left (if you need to change the right lamp)

Check the condition of the VAZ-2110 light and start by assessing the condition of the contacts. To do this, disconnect the minus on the battery and remove the lower cover of the steering column

On Honda Achord 8 there is a function to automatically reset the mileage meter for one trip each time it is loaded. To do this, press the INFO button until TRIP A RESET WITH REFUEL is displayed. Then, click the SEL/RESET button and go to the configuration procedure