Tools: flat-blade screwdriver, head on 16 with extension cord and flask.
Procedure:
1. Remove the plastic cover of the engine by pulling it up.
2. It is necessary to distiple the four coils from the ramp from the first cylinder (from left to right). Use a screwdriver to unplug the cable clips. Then, with the same screwdriver, gently pull the coils and pull them up slightly.
3. Scrolling the spark plugs and pulling them out of the wells. It's not hard to pull out the candles if the head is 16 with a magnet. If not, we can use the ignition coils.
4. Installing new candles in reverse order.
