The replacement of the antifreeze (coolant) is carried out in several steps:

1. Heat and out the engine;

2. Open the expansion cover to reset the system pressure;

3. To freeze the anti-freeze at the bottom of the heat sink;

4. If the anti-freeze is in the lower part of the cylinder block, after the discharge, it is necessary to put the cork in place at once through the new gasket.

5. Close the cork in the radiator;

6. Fill the new anti-freeze to the expansion tank;

7. Heat up the engine, check the antifreeze level, add fluids if necessary.

The SsangYong Kyron cooling system uses the original antifreeze SsangYong HOECHST GENANTIN SUPER SUPER 8023/14, which is diluted with water at a ratio of 1:1.




Add comment

Security code
Refresh