The Opel Corsa D must stand on a level floor during the procedure of replacement of the antifreeze. In the right part of the subspace, near the radiator, there is an expansion bug. The yellow filler cap must be untanned. Next, you should wear a suitable size hose on the drain tube. The free end of the hose must be lowered into the capacity to drain antifreeze.
Next, you need to turn the tube together with the hose on the back of the line, counterclockwise, with a key or a pair of pliers. It is recommended that you unscrew the cork at the top of the heat sink to quickly leak anti-freeze. The next thing you need to do is roll the slime, fill up the fresh antifreeze and clean the system, start the engine, and let it work until it turns on the heat sink fan.
If there is a suspicion that there is a lot of dirt in the radiator, you can add a detergent from the auto shop to antifreeze antifreeze. Then it is necessary to merge the antifreeze and fill the new portion. It is recommended that this procedure be repeated until the fluid of the liquid becomes clear.