The air mass flow sensor (MPV) on Lada Prior is between air filter and air duct. It shall be verified as follows:
1) Disconnect minutes from the battery.
2) Using a flat-blade screwdriver, disconnect the wires from the sensor.
3) Loosen and disconnect the duct of the breeder from the MRI.
4) Unscrew the two screws and remove the sensor from the filter.
5) Remove the rubber gasket and inspect it for damage.
(6) Merit resistance between the conclusions of the MRI. It shall be:
- At 100 ° C to 200 Om
- At 80 C-332 Om
- At 60 ° C to 600 Om
- At 40 ° C-1200 Ohm
- At 20 ° C-2400
- At 10 ° C to 3600 Om
- At 0 C-5,500 Om
- At -10 ° C to 8600 Om
- At -20 ° C-13900 Om
7) If necessary, change the sensor and set everything in reverse sequence.