Select your language

The gas pump at Gil MK is located in the petrol tank fuel module. If poor petrol is used, a gas pump may be clogged and shall be purged. To do this, we do the following: drop the pressure in the system, reset the battery, remove the rear seat cushion. Then remove the screwdriver and remove the fuel module cover.

Then, disconnect the wires and the fuel lines from the module. With the help of a hammer and a NDR, we weaken the flange of the module.

We remove the flange and carefully pull out the fuel module. I'm going to throw out the gasoline residue and we're going through the module.

We take off the rough cleaning filter and clean it up or change it.

Put it all in place.

Add comment