To assess the proper functioning of the hydraulic compensators on Mitsubishi Pajero 4, do the following:
(1) Depth motor and remove the cap of the cylinder head.
(2) Put the first cylinder piston in the TDC position.
(3) Click on the Coromys on the left side (check the following cores, if viewed on the side of the GRM-front left and right, middle left, rear right).
(4) The coromsl of the right HBO (check the following cores, if viewed from the GRM-front-to-front right, rear left).
5) Slowly turning the wheel 360 degrees clockwise and press the remaining boxes.
(6) When pressed, the resistance shall be felt. If the crust is easily moved down, hydrocompensator is to be repaired or replaced.
