The failure of the pillars of the transverse stability stabilizer is one of the most frequent breakdowns in the Opel Corsa D. To remove the transverse stability stabilizer, you should put the car on the handbrake and insert in the rear wheels of the underrun shoes. Then, loosening the wheel-fixing bolts and removing the wheels. Then, the nut clip of the attachment of the tip of the steering wheel and detach it from the pivoting fist should be turned off. The next clip-nut that you want to unmount is the attachment nut of the upper edge of the stabilizer bar to the rack-spacer arm. You can then display the finger of the top pivot. By analogy, it is necessary to spin and remove the finger of the lower bar. You can now remove the stabilizer foot and unmount the rack cabinet by unlocking the right and left hinge pins.