The front wheels must be reduced and placed on the floggings for reliability. The next step is to disconnect the hydro-amplifier and return the silicon hose to the back-line. The next step is to disconnect the high-voltage power line and periodically turn the starter to the left. This procedure needs to be repeated several times, until the hydraulic amplifier does not stop. After that, it is necessary to secure the reverse trunk of the homma and fill the recommended amount of liquid of the gPM.The manufacturer recommends that the Tieggo hydro-amplifier be used for automatic transmissions with ATF III marking.
- Then we need to disconnect the hydraulic amplifier's return line, attach the silicone hose to the return line and drain the hydraulic amplifier fluid in the prepared capacity.
- The next step is to disconnect the high voltage live wire and periodically turn the starter out to the left until it stops.
- This procedure must be repeated several times until the fluid of the hydro-amplifier stops flowing.
- After that, it is necessary to consolidate the reverse backbone of the hominid and fill the recommended amount of liquid of the GRM.
- The manufacturer recommends that the liquid Hydroamplifier of the liquid for automatic transmissions with ATF III be used.
