Transmission

Replacing a checkpoint with a Ford Focus 2

Replacing a checkpoint with a Ford Focus 2
A gear-shift case of a manual gearbox is often erased before the holes in the scrap. The case is not hard to replace.

Replacing the ILC spring with a Ford Focus 1

Replacing the ILC spring with a Ford Focus 1
Some owners of the first generation of Focus are facing the breakup of the LCB levers. This spring holds the lever in the neutral position opposite the third gear. When the spring break is broken, the lever starts to hang in neutral

VAZ-2104/05/07 rear axle reducer options

VAZ-2104/05/07 rear axle reducer options
Most of the time, the owners of the VAZ 2105 are complaining of the buzz or the howl coming from the rear of the car. There are four main reasons for the appearance of unauthorized sounds in the rear of the rear axle: 1

Do you need to press the clutch when you start the Ford Fusion engine in the cold?

Do you need to press the clutch when you start the Ford Fusion engine in the cold?
Running the engine in winter is a serious test for any car. Studies have shown that one winter engine start is about a hundred kilometers in warm weather. That is why we should take the engine in the winter with special care

Special features of the automatic transmission of Ford Fusion

Special features of the automatic transmission of Ford Fusion
The "machine" on Fusion is quite reliable. Most of his breakdowns are part of a shift to a neutral gear. This is often not recommended. Another peculiarity is the propensity to slide back into the mountain

VAZ-2104/05/07 VAZ-2104/05/07 Vibration

VAZ-2104/05/07 VAZ-2104/05/07 Vibration
VAZ-2104/05/07 Vibration and Braking Vibrations-2104/05/07, as well as passing a certain speed threshold (usually 90-100 kilometers per hour) indicate the most common violation of the balancing shaft

Fragmatized gearbox DuraShift on Ford Fusion

Fragmatized gearbox DuraShift on Ford Fusion
The Robotic Fusion box is not suppressed, that is, it is equipped with one clutch. Because of this, there may be noticeable delays between gears

Bad inclusion of first hand on Ford Fusion with MCP

Bad inclusion of first hand on Ford Fusion with MCP
The effort to include the first transmission is a common problem for Fusion. There is an opinion that the reason is in the massive gears of gears and high load on synchronizers. It is also sometimes possible to solve the problem of milk oil in the ICIE or the replacement of oil

VAZ-2104/05/07 VAZ-2104/05/07

VAZ-2104/05/07 VAZ-2104/05/07
VAZ-2104/05/07 VAZ-2104/05/07 is a common problem for VAZs classic gear boxes. In general, this is due to the wear of the gear and the associated elements of the transfer on the primary

Why doesn't the smooth start mode work on Ford Fusion with a robotic gearbox?

Why doesn't the smooth start mode work on Ford Fusion with a robotic gearbox?
With a smooth start, the clutches of the clutch are not completely flushed, which allows them to slip a little, and the car starts to move smoothly