Transmission

To remove the intermediate shaft K20Z on the Honda Civil 8, remove the right semi-axis. Remove the heater. Disconnect the intermediate shaft from the differential by unlocking the nut bolt and two installation bolts

In order to remove the impedance of the IBC on Mazda 3 (I) it is necessary to remove the oil from the efficiency of the engine and remove the brake disc and brake disc. Remove the ball joint at the tip of the steering gear and the stabilizer bar.

One of the peculiarities of the "vending machine" on the third generation CR-V is the vehicle starting to roll back at the moment of the throttle, until the driver clicks on the accelerator pedal

If a [ [ Honda CR-V III]] with the ICIE is to enable the transfer, it is necessary to make extra effort, which means that the elements of the box mechanism may be out of order, perhaps synchronizers

To remove the front connecting shaft to Mazda 3 (I), you must:

In normal mode, on a dry road, when the front and rear wheels of the Honda CR-V are rotated at the same speed, the torque shall be transmitted to the front axle only

The date of replacement of the automatic transmission filter by the manufacturer is not regulated. However, many experts recommend changing it every 60 ,000-70, 000 km of mileage

To remove the front of the front wheel to Mazda 3 (I), it is necessary to remove the curved part of the counterparty with the help of a small snake and hammer. Lock the hub by pressing the brake.

If the sound is not active in the rearward movement, this grinds the oil in the rear gear. This is a very common problem for the 4x4 Honda Fit. As a rule, after the oil is refreshed, the sound disappears

The movement of Honda Jazz, as well as the chaotic twerps of the tachometer needle, are very common "symptoms of the disease" for Honda Jazz. The most common problem is the [ [ hydroplane]]